It’s already Satan’s Sauna here in Louisiana, which does not bode well for just how miserable we will all be come August. The garden is in and going great, and I’ll probably put up a post later in the week about the new raised beds we built. The husband has been travelling constantly, so I’m happy we were able to get this project done in time for the summer season.
Anyway, throughout the May Gauntlet, I managed to squeak in a couple of more finished knits:
Yarn: Cascade 220 Superwash Merino in the Seafoam Green colorway (note–the yarn does have the tiniest hint of green in it. It just did not photograph well)
Needles: US 7
Notes and Mods: I followed the pattern as written then pinned it to dimensions using my knit blockers. I sprayed it lightly with water and let dry. This is Cascade’s recommended method as this yarn does not do well with wet blocking. Overall, I like the block, but with almost 100% of the RS rows featuring cabling, it’s certainly not on-the-go knitting, but otherwise, all the techniques are suitable for an advanced beginner.
Pattern: Just a basic Vanilla Sock for the Husband
Yarn: Sidar Sole to Sole in the 163 colorway
Needles: US 1 DPNs
Notes and Mods: I keep a sock project bag in my car in case of knitting emergencies, so these came together on and off over the past year. Don’t let the pic fool you, these do fit my husband. I had G-Man try them on to take a project picture, and his foot is a little smaller. FYI–Hubs wears a size 12, so I CO 72 stitches, did about 1-1/4 inches of 2×2 ribbing, then knit in stockinette for about 6-3/4 inches (measured from the top) before starting the heel flap. Once the flap was done and stitches picked up, I knit the foot, which was about 8-1/4 inches from the heel flap, and then started the toe decreases. For his next sock, I am going to try the Vanilla is the New Black pattern because I think the heel might be better.
In addition to the knitting, I also have been playing with my new Cricut, which definitely has a learning curve. Here are a few of the test items:
I’m hoping to experiment some more when we get past the family reunion this weekend. Otherwise, I’ll be surviving the heat and enjoying slower days.
Sooooooooo, after lusting after the Workbox 3.0 from the Original Scrapbox, we finally bit the bullet and ordered one. Considering the hefty price tag on this item, it really is an investment that you need to feel confident about, and that you are making for the right reasons. Here are the contributing factors that tipped the decision to purchase this into the “yes” category.
I am a big crafter. I knit, I sew a bit, I embroider, I recently fell down the Cricut rabbit hole, and I make candles.
My yarn stash and craft supplies overtook my closet, under my bed, parts of the garage, the laundry room, and more. I spent far too much time digging through these areas to find stuff, which made projects take longer than necessary. It also sucked the fun out of the process
I do not have a craft room or space for one in my house, nor do I have a desk or office.
Any crafting required me to drag out sometimes heavy stuff to the kitchen table, which made the prospect of working on a project seem burdensome.
I wanted my closet back and you will pry my yarn stash from me at risk to your own life, so don’t even suggest downsizing.
After a lot of hemming and hawing, as well as review research, I ordered one. I decided on the black beadboard model and added the crown accessory (which is the crown molding on top with an included light kit.)
The first thing you need to know is that it’s at least a six to eight week turnaround time from order to delivery, so you could be waiting two months to get the product. Secondly, this ships in a large crate which has to be delivered by a professional freight service, and they will only put it in your driveway. You have to be home for delivery, and it better not be on a rainy day, because you will need to crowbar open the crate, and then you must carry about 30 boxes and container stacks into your house asap. I highly encourage you to talk to the freight company when they call if you have any concerns about a giant truck being able to get to your location and offload a large crate without incident.
Also, while the assembly instructions are pretty good, you will still need several hours and you really can’t do this without two people, so plan ahead for that. We ran into problems with damaged pieces (which I will get into in a minute), but had we not, this still would have taken the Hubs and me about two days to assemble, working in 3-4 hour increments.
Let’s get into the concerning aspects of my experience. When I opened the crate, none of the plastic bins were broken, but most had scuff marks on them. They were not packaged separately in the crate, and were only protected by paper between them to prevent sticking in their stacks (though some still stuck together and had to be finessed apart). I am still amazed I managed to separate them without breakage. Most of the cabinet pieces appeared intact, but Scrapbox provides a jar of touch-up paint, so they clearly anticipate items getting damaged in shipping. Given the price-point, that was kind of a raised eyebrow moment for me.
With so many boxes and pieces, it was impossible for me to open and inspect every item immediately. The boxes alone overtook my entire dining room, so we just started with assembly. If you have a small home or space, this process will overtake much more area than you think, because you will have boxes and pieces everywhere.
The boxes are labeled very well with numbers, as are almost all of the pieces, so Scrapbox has put in a lot of effort to make assembly as easy as possible for a piece of this size. That was a plus. However, we got about 1/4 through the assembly when the first problem cropped up:
These two pieces of the center component were broken when we opened it’s box. I emailed customer service, and they sent replacements. However, this took a little over a week, so I had a 1/4 finished Workbox with parts spread across my house, making my dining room unusable and my bedroom a maze. When the pieces finally came in, we resumed assembly and made it almost to the finish line. I wish that they offered expedited shipping for these issues, because, as you will read, it only got worse.
Then, we unboxed the crown addition, and it was cracked and unusable. I emailed customer service again, and again, they sent a replacement (another week+ delay and house in chaos), and guess what?
That’s what I saw as soon as I opened the box. So, we are now nearly a month in of trying to assemble this thing (after waiting nearly two months for it), two broken crown units later, and I am not happy. My husband is VERY not happy. In addition to this, I will say that generally, my customer service experience was good, but I did have to prod for follow ups or answers as this dragged on, which did not help my frustration level.
The next crown unit came, and praise Jeebus, it was intact! We finally finished assembly and I could actually see the conclusion of the project that would never end. Now, let’s take a look at my Workbox 3.0:
Above is the unit fully open, with desk extended, and the light on. A quick note on the plastic bins–every single bin has optional inserts or dividers that are included. So, you can divide the taller bins into sections for even more storage options, and the inserts for the larger, flatter drawers are perfect for notions. I am very happy with the level of optional customization without additional purchases. I can constantly re-work the bins and shelves to adjust to my needs. The light in the crown kit is nice and bright, and I like the finished look of the crown molding. However, it’s up to you on whether that is enough reason to spend that much extra. After the drama of the crown kit, I am still getting over my frustration. However, I definitely needed the light in my darker room. Now, lets look into the specifics:
Before I open the cabinet fully, there’s space on the backside for my Cricut mats, which is handy. You can hang anything on these that is fairly flat. I used small Command hooks. I will also hang up my fabric rulers on the other door at a later date.
The right door has a panel of Velcro zipper pockets, and a series of larger and smaller shelves/bins. I am using them for yarn, and am still working on loading up the smaller bins.
This is the top of the center panel. I have my bins stuffed with my Cricut vinyl, embroidery supplies, fabric, glue guns, paper, and more. The drawers host miscellaneous stuff.
The desk folds out easily, though the legs can be tough to fold up if they are feeling sticky. There is plenty of room in the desk cubby for my Cricut Maker and my Cricut Easy Press. If you do Cricut or similar devices, this is a big bonus for accessibility.
Below the desk, I store my sewing machine, ball winder and swift, my knitting needle binder, and pattern magazines.
On the left door, I store more yarn, more needles, some works in progress, Cricut tools, paints, and still have plenty of room for more. There are optional rods for easy ribbon dispensing, but I don’t need those at this time. I am still working on organization, but I have plenty of room to grow and adjust.
**Note** I did not put my candle supplies in here. Between the scents, dyes, and waxes, these materials can cause a lot of damage if they co-mingle with other stuff, so I keep those in the laundry room and isolated.
I’ve spent a lot of time crafting the past couple of weeks, and here’s what I think.
It’s basically a craft room in an armoire, because it looks nice and offers a functional workspace in smaller environments. This really was a perfect solution for me.
It solved almost all of my craft storage and workspace challenges.
Endless customization means this can change and evolve with my needs.
All the bins and dividers come with it, as well as the Velcro zipper pouches, so you are not just buying the cabinet, you are getting all of the components as well, which factors into the price value.
I can start and stop projects quickly and easily because my materials are within arms’ reach.
I get an incredible sense of satisfaction being able to see and access my materials in an instant, rather than dig storage bins from underneath my bed or risk a concussion pulling down my sewing machine from the closet shelf. I get a certain mental boost being surrounded by a perfectly organized craft room I can tuck away in seconds.
It makes me happy,
You could be looking at weeks/months from order to final assembly.
Scrapbox still needs to work on their quality control, especially when it comes to shipping. The jar of touch-up paint demonstrates that they know you will likely encounter damage. At this price point and time investment, I think they could do better, especially when it’s particle board and not solid wood.
Customer service starts great but may need prodding if your issue lasts longer than the initial encounter. Despite small delays, I believe the service is still good and my perceptions need to be taken in context of my extended experience and frustrations. Additionally, I wish they expedited shipping after my assembly dragged out so long due to damaged goods.
Delivery offers potential challenges to people who live in apartments, small homes, rural areas, and more. If delivery seems expensive, it’s because an actual freight company is delivering a giant crate on a forklift. You have to factor this in when considering your purchase.
Pay attention to the dimensions and measure your space. This may be as wide and tall as many armoires, but it’s also twice as deep, not to mention the room needed to open the doors to full extension. If you need to, cut ribbon or paper strips to help you layout a visual example of the dimensions. It’s bigger than you think.
Take pictures of any and all damage, from the crate upon delivery to any damaged pieces you encounter. After the second crown was delivered, I had my camera ready and took numerous pictures of the box on my porch and it’s condition, the damage observed as soon as I opened the box, and the open and broken light kit within the box. This not only helped resolve the issue with Scrapbox, but they thanked me because it could help them with shipping insurance issues.
Do not assume you can assemble this by yourself or quickly. It’s a project, though it’s not difficult. Manage your assembly expectations and you will be ok.
Be honest about why you are buying this and the cost. For me, the cost really was worth the utility it brings, the solutions it offers, and I use it every day. I was lacking in storage and hating spending 10-15 minutes dragging out my equipment and materials across the house before even starting a project. If you have a viable solution for a craft space outside of this, I encourage you to explore that first (unless you have the expendable income to buy this at will). Don’t buy it because it looks cool. Buy it because the you are honest about the cost-benefit analysis. The cost for most people means that it needs to be a true solution, and not just a whim.
So, there ya have it. I bought the thing, I hated the process of finishing the thing, but I now love the thing. If you have any questions, leave a comment and I’ll be happy to help!
**just a reminder. My blog is not sponsored or monetized. This my own review of an item I paid for myself at full price. Original Scrapbox doesn’t know me other than the headache I brought to their customer service. My review is mine alone. If you see any ad on my blog, that’s from WordPress, and I have no control over whether or not you see an ad or its content. That’s free blogging, yo. **